Name: 8TE Frontpanel Midi to CV-Pedal-USB DIY-Kit - musikandmore.net
SKU: 4400
Price: 85.00 EUR
Availability: InStock

„Midi to CV-Pedal-USB for Navipanel V3 DIY-Kit“ wurde deinem Warenkorb hinzugefügt. Warenkorb anzeigen

8TE-MIDI-to-CV-PEDAL-USB-FrontpanelV1-v70

Breakout-MIDI-to-CV-Board-V3-R02-v286-top

85,00€ inkl. 19% MwSt. (netto 71,43€)

inkl. 19 % MwSt. Lieferung zzgl. Versandkosten

8TE Frontpanel Midi to CV-Pedal-USB für Midi-Breakout DIY-Kit / Komplettbausatz

Beschreibung und Lieferumfang: Siehe unten…
nur für Eurorack Version

Lieferzeit: 2-3 Werktage

Vorrätig (kann nachbestellt werden)

Produkt enthält: 1 Stück

Artikelnummer: 4400 Kategorien: Navipanel-V3 Optionen, Studio-Produkte Schlagwörter: 19" Variante for Microdexed, 4-Channel-DAC, Midi-to-CV-PEDAL-USB, NaviPanel V3, TRS-Breakout 1/4" Marke: Eigenmarke, Microdexed, musikandmore

Beschreibung

8TE Frontpanel Midi to CV-Pedal-USB für Midi-Breakout DIY-Kit / Komplettbausatz

nur für Eurorack Version

Hardware-Rev.: V3-R02-v76 vom 02.07.2025 / V3-R03-v85 vom 21.09.2025

inkl. PCB Midi to CV-Pedal-USB-Breakout v76 vom 02.07.2025
inkl. PCB Amphenol-TRS-6,35mm-Breakout v46 vom 20.08.2025
inkl. PCB Frontpanel 8TE-MIDItoCV-Panel-V1-v11 vom 21.05.2025

8TE Frontpanel für Midi to CV-Pedal-USB Erweiterungsplatine

4-Channel DAC-Outputs mit 12 Bit Auflösung für NOTE, VELOCITY, 2x MIDI CC mit professionellen Spannungspegeln OP-AMP (0-+8V/0-+10V)
GATE OUT für NOTE ON/OFF (0/+5V)
TRS 6,35mm/1/4″ Volume-Pedal- und Sustain-Pedal-Anschluss im PCB-8TE-Frontpanel
USB-A4 vom USB HUB oder USB HOST vom Teensy 4.1, Anschluss im PCB-8TE-Frontpane

Lieferumfang

Sämtliche Bauteile laut Stückliste (BOM) für Eurorack
1x 16pol. Flachbandkabel 20cm
1x 16pol. Flachbandkabel 10cm
1x USB-A4.Adapter-Kabel 4pol. 20cm
4x M3x7 Befaco Knurlies M3

Technische Informationen

Features

8TE Frontpanel für MIDI to CV PEDAL- USB-Erweiterung für Midi Breakout-Board – 4-Channel DAC-Outputs mit 12 Bit Auflösung

Anschlüsse

TS 3,5mm Miniklinkebuchse GATE OUT 0/+5V
TRS 6,35mm 1/4″ Klinkebuchse SUSTAIN PEDAL IN 0/+5V
TRS 6,35mm 1/4″ Klinkebuchse VOLUME PEDAL IN 0-3,3V
TS 3,5mm Miniklinkebuchse CV-OUT Ch.A = NOTE 0-8V = max. 8 Oktaven 1V/Oktave (0-3300)
TS 3,5mm Miniklinkebuchse CV-OUT Ch.B = MIDI-CC 0-10V / 0-127 (CC Controller frei wählbar)
TS 3,5mm Miniklinkebuchse CV-OUT Ch.C = VELOCITY 0-10V / 0-127
TS 3,5mm Miniklinkebuchse CV-OUT Ch.D = MIDI-CC 0-10V / 0-127 (CC Controller frei wählbar)

Schnittstellen

USB-HUB mit 1 USB-A Port oder USB-HOST

UI-Interface

1x LED +5V PWR 3mm red
1x LED GATE OUT 3mm red

Prozessor | Software

Sandwichboard für Navipanel V3 Mainboard mit Midi to CV-Pedal-USB Breakout Board
aktueller Software-Download https://codeberg.org/positionhigh/MicroDexed-touch/releases oder unter Downloads

Abmessungen | Gehäuse

PCBs 3HE / 8TE / Dimensions (B x L x H) 40,6 x128,4x33mm bestückt
nur für Eurorack-Gehäuse
Gewicht ca. 95g

Technical data 8TE-Frontpanel-Midi-to-CV-Pedal-USB / September 22, 2025

8TE Frontpanel for Midi to CV / Pedal USB / Navipanel Mainboard from V3-R05-v541

8TE Frontpanel for Midi to CV / Pedal USB / Date: September 22, 2025	Technical data sheet	ID-(BOM)	X1/X1W PINs
01) Modularrack 3HE / 40TE / Dimensions (W x L x H) 206x127x33mm	Eurorack	optional… 1*)
02) Desktop Eurorack Behringer 104TE / Dimensions (W x L x H) 546x133x84mm	Metal housing	optional… 1*)
03) Desktop Alu-Case 4MS pod40 powered / Dimensions (W x L x H) 206x159x40mm	Metal housing	optional… 1*)
04) power supply ( USB-C Power-Supply Breakout and 4MS 45W Power Brick)	Power-Supply	optional… 1*)
05) 16-pin box connector with 20cm ribbon cable	for modular (+5V)	Eurorack-Cable
06) 16-pin box connector with 10cm ribbon cable	for 8TE Eurorack Frontpanel	Eurorack-Cable	1-16
07) internal / external supply for USB-Hub	switchable	included
08) from USB-HOST Hub Port 4, 1x USB-A of which are NOT in the front panel	from active USB hub U6	U6 (Mainbaord)
09) 1x USB A connectors on the back via 4-pin connector	USB-A 2.0	X5B HOST- X4B
10) 1x S1 Switch Eurorack-Power LEDs WHITE	S1 Switch Eurorack PWR	S1 Switch
11) 1x S2 Switch Polarized for Volume TR /RT GREEN	S2 Switch Polarized	S2 Switch
12) DAC Channel 1(A) 0-8VDC = 0-3300 (4095) /TS 3,5mm / 1V/Octave	CV output 1 (NOTE)	TRS 3,5mm	9
13) DAC Channel 2(B) 0-10VDC = 0-3300 (4095) /TS 3,5mm	CV output 2 (MIDI CC)	TRS 3,5mm	11
14) DAC Channel 3(C) 0-10VDC = 0-3300 (4095) /TS 3,5mm	CV output 3 (Velocity	TRS 3,5mm	13
15) DAC Channel 4(D) 0-10VDC = 0-3300 (4095) /TS 3,5mm	CV output 4 (MIDI CC)	TRS 3,5mm	15
16) GATE OUT TRS 3,5mm 0/5V Optocouplers	modular connection	TRS 3,5mm	5
17) PEDAL Volume Input 1/4 inch TRS +3,3V /Signal /GND (Amphenol Conn.)	modular connection	TRS 6,35mm	6/4
18) CV IN / alternative 0-5VDC / 0-10VDC Input (protected with suppressor diodes)	modular connection	TRS 6,35mm	6/4
19) PEDAL SUSTAIN IN = SUSTAIN 0/+3,3V= LOW/HIGH (Amphenol Conn.)	modular connection	TRS 6,35mm	12/10
20) LED2 GATE OUT (Frontpanel)	LED 3mm low current RED	LED2	7
21) LED1 5V Power	LED 3mm low current RED	LED1	14 (VCC +5V)
22) LED3 +12V Eurorack-Power	LED 3mm low current RED	LED3
23) LED4 -12V Eurorack-Power	LED 3mm low current RED	LED4
24) NOT USED Expansion-Connector 16pol for 8TE Frontpanel with 90° 2x8pol.	MIDI to CV /Pedals / LEDs	X1W	1/2/8 (GND)
25) Expansion-Connector 16pol for 8TE Frontpanel with Eurorack compatible	MIDI to CV /Pedals / LEDs	X1	1/2/8 (GND)
25) Expansion-Connector 16pol		X1/X1W	3 (AGND)
25) Expansion-Connector 16pol		X1/X1W	16 (VDD +12V)
Note 1*): the technical data apply from motherboard version and the Navipanel V3 Mainboard is necessary! Used Eurorack min. 40TE/3HE	V3-R05-v541, July 02, 2025
Midi to CV PCB version (Breakout-Board V3.3) with CV and Gate, Pedals and USB-A4	V3-R03-v309, August 21, 2025
Note 2*) only on the smaller pedal / USB PCB version (PEDAL-USB-Breakout-Board) without Midi to CV and Gate OUT	V3-R02-v73, July 02, 2025

Stromversorgung

Eurorack Stromversorgung +5V/+12V/-12V mit 16pol. Wannenstecker möglich (es wird nur +5V/GND benötigt)
5VCC Versorgung über das NAVIPANEL Mainboard
+12VDD für OPAMP-Analogversorgung über das NAVIPANEL Mainboard

BOM Part-list for NAVIPANEL 8TE-Frontpanel-Midi-to-CV-Pedal-USB

Midi to CV / Pedal / USB /V2-R02-v84 / 22-09-2025

Part	Value	Detailed Description	Device	Footprint Name
C2	100nF	CAPACITOR	C5/2.5	C5B2.5
CV-OUT-A	WQP518MA-MONO	Black Thonkiconn Mono 3.5mm Audio Jacks	WQP518MA-MONO	WQP-PJ366-ST_JACK
CV-OUT-B	WQP518MA-MONO	Black Thonkiconn Mono 3.5mm Audio Jacks	WQP518MA-MONO	WQP-PJ366-ST_JACK
CV-OUT-C	WQP518MA-MONO	Black Thonkiconn Mono 3.5mm Audio Jacks	WQP518MA-MONO	WQP-PJ366-ST_JACK
CV-OUT-D	WQP518MA-MONO	Black Thonkiconn Mono 3.5mm Audio Jacks	WQP518MA-MONO	WQP-PJ366-ST_JACK
EURORACK_CABLE	Flatcable_16pol_20cm	Flatcable_16pol_20cm	Flatcable_16pol_20cm	Flatcable_16pol_20cm
GATE-OUT	WQP518MA-MONO	Black Thonkiconn Mono 3.5mm Audio Jacks	WQP518MA-MONO	WQP-PJ366-ST_JACK
H1	STANDOFF_M3X11mm_I/I_V2A	STANDOFF_M3X11mm_I/I_V2A	STANDOFF_M3X11mm_I/I_V2A	STANDOFF_M3X11mm_I/I_V2A
H2	STANDOFF_M3X11mm_I/I_V2A	STANDOFF_M3X11mm_I/I_V2A	STANDOFF_M3X11mm_I/I_V2A	STANDOFF_M3X11mm_I/I_V2A
H3	STANDOFF_M3X11mm_I/I_V2A	STANDOFF_M3X11mm_I/I_V2A	STANDOFF_M3X11mm_I/I_V2A	STANDOFF_M3X11mm_I/I_V2A
H4	STANDOFF_M3X11mm_I/I_V2A	STANDOFF_M3X11mm_I/I_V2A	STANDOFF_M3X11mm_I/I_V2A	STANDOFF_M3X11mm_I/I_V2A
H5	STANDOFF_M3X12mm_I/A_brass	STANDOFF_M3X12mm_I/A_brass	STANDOFF_M3X12mm_I/A_brass	STANDOFF_M3X12mm_I/A_brass
H30-H31	2x_WASHER_DIN125A_3,2mm_for_distance	2x_WASHER_DIN125A_3,2mm_for_distance	2x_WASHER_DIN125A_3,2mm_for_distance	2x_WASHER_DIN125A_3,2mm_for_distance
H40-	1x_NUTS_DIN127_M3_for_Standoff_M3x15mm	1x_NUTS_DIN127_M3_for_Standoff_M3x15mm	1x_NUTS_DIN127_M3_for_Standoff_M3x15mm	1x_NUTS_DIN127_M3_for_Standoff_M3x15mm
H50-H54	5x_SCREWS_M3x5mm_ISO7380-1_V2A	5x_SCREWS_M3x5mm_ISO7380-1_V2A	5x_SCREWS_M3x5mm_ISO7380-1_V2A	5x_SCREWS_M3x5mm_ISO7380-1_V2A
JUMPER	JUMPER 2pol.	JUMPER 2pol.	JUMPER 2pol.	JUMPER 2pol.
LED1	LED1/+5V	3mm_red_low_current	LED_ELD260	LED_LD260
LED2-GATE-OUT	LED2-GATE-OUT	3mm_red_low_current	LED_ELD260	LED_LD260
LED3	LED3/+12V	3mm_red_low_current	LED_ELD260	LED_LD260
LED4	LED4/-12V	3mm_red_low_current	LED_ELD260	LED_LD260
LED1-4_STANDOFF	4x_LED3mm-STANDOFF_d5x9mm	4x_LED3mm-STANDOFF_d5x9mm (000183421)	4x_LED3mm-STANDOFF_d5x9mm	4x_LED3mm-STANDOFF_d5x9mm
PCB_BREAKOUT	8TE-Midi-to-CV-Pedal-USB_V3-R02-v76_02-07-2025	8TE-Midi-to-CV-Pedal-USB_V3-R02-v76_02-07-2025	8TE-Midi-to-CV-Pedal-USB_V3-R02-v76_02-07-2025	8TE-Midi-to-CV-Pedal-USB_V3-R02-v76_02-07-2025
PCB_BREAKOUT1	Amphenol-TRS-6-35-Breakout-v46_20-08-2025	Amphenol-TRS-6-35-Breakout-v46_20-08-2025	Amphenol-TRS-6-35-Breakout-v46_20-08-2025	Amphenol-TRS-6-35-Breakout-v46_20-08-2025
PCB_BREAKOUT3	8TE-Frontpanel-Midi-to-CV_V1-v11_21-05-2025	8TE-Frontpanel-Midi-to-CV_V1-v11_21-05-2025	8TE-Frontpanel-Midi-to-CV_V1-v11_21-05-2025	8TE-Frontpanel-Midi-to-CV_V1-v11_21-05-2025
R1	680R	RESISTOR, European symbol	R-EU_0207/10	0207/10
R2	680R	RESISTOR, European symbol	R-EU_0207/10	0207/10
R3	1K8	RESISTOR, European symbol	R-EU_0207/10	0207/10
R4	1K8	RESISTOR, European symbol	R-EU_0207/10	0207/10
S1	PWR Eurorack / DPDT Latching Push Button WHITE	DPDT Latching Push Button WHITE thonk.co.uk	DPDT Latching Push Button WHITE	9077-2
S2	Polarzid Volume/DPDT Latching Push Button GREEN	DPDT Latching Push Button GREEN thonk.co.uk	DPDT Latching Push Button GREEN	9077-2
TRS-SUSTAIN	1x Amphenol-TRS-6.35mm_Jacks-vertikal	1x Amphenol-TRS-6.35mm_Jacks-vertikal ASJS-MV-3	1x Amphenol-TRS-6.35mm_Jacks-vertikal	1x Amphenol-TRS-6.35mm_Jacks-vertikal
TRS-VOLUME	1x Amphenol-TRS-6.35mm_Jacks-vertikal	1x Amphenol-TRS-6.35mm_Jacks-vertikal ASJS-MV-3	1x Amphenol-TRS-6.35mm_Jacks-vertikal	1x Amphenol-TRS-6.35mm_Jacks-vertikal
USB-4-CABLE	1x USB4_Cable_20cm_4pol	1x USB4_Cable_20cm_4pol	1x USB4_Cable_20cm_4pol	1x USB4_Cable_20cm_4pol
X1	Expa.Board 8TE	HARTING	ML16	ML16
X1W not used	Expa.Board 8TE not used	PIN HEADER 2x 8pol 90° not used	MA08-2W	MA08-2W
X2	EURORACK_IN	HARTING	ML16	ML16
X3	Vertical,Top Entry USB Connector KUSBVX Series	Vertical,Top Entry USB Connector KUSBVX Series	KUSBVX	KUSBVX
X4B	USB-4	PIN HEADER 1x4pol	PIN HEADER 1x4pol	PIN HEADER 1x4pol
X5	EURORACK POWER	PIN HEADER 1x4pol	PIN HEADER 1x4pol	PIN HEADER 1x4pol
X6	EURORACK GATE/CV	PIN HEADER 1x3pol	PIN HEADER 1x3pol	PIN HEADER 1x3pol
X7	TRS-Breakout FEMALE 6pol	FEMALE HEADER 6pol	FEMALE HEADER 6pol	FEMALE HEADER 6pol
TRS-X8	1x Pin-Header 6pol for TRS Breakout	1x Pin-Header 6pol for TRS Breakout	1x Pin-Header 6pol	1x Pin-Header 6pol

Bauanleitung | Links

Downloads

aktueller Software-Download https://codeberg.org/positionhigh/MicroDexed-touch/releases oder unter Downloads

Bitte melden Sie sich an, um den Anhang herunterzuladen

Zusätzliche Informationen

Gewicht	95 g
Größe	41 × 128 × 33 mm

Produktsicherheit

Herstellerinformationen

Designvorsprung
Nicole Effendy
Steinebergstraße 6
87527 Sonthofen, Deutschland
Tel.: +49 8321 6908154
Fax: +49 8321 6908153
E-Mail: info@designvorsprung.de
Umsatzsteuer-Identifikationsnummer: DE286266191

Verantwortliche Person in der EU

Thomas Effendy
Musikandmore
Tel.: +49 8321 6908155
Fax: +49 8321 6908153
E-Mail: info@musikandmore.net

Dokumente zur Produktsicherheit

Sicherheitshinweise

Zur Information: nur DIY Bauteile Lieferung!

Rezensionen

Es gibt noch keine Rezensionen.

Nur angemeldete Kunden, die dieses Produkt gekauft haben, dürfen eine Rezension abgeben.

8TE Frontpanel Midi to CV-Pedal-USB DIY-Kit

Beschreibung